Products

Dynarex Isolation Gowns are premium-quality gowns designed to help protect patients and medical providers against the transfer of bacteria and microorganisms. These disposable Isolation gowns feature lightweight, breathable materials for optimal comfort and elastic cuffs for improved protection and easy donning. These gowns are designed with sewn seams and extra-long waist ties that can be secured in the front of the body for added convenience. These full-coverage gowns feature universal sizing to fit a variety of individuals. Dynarex Isolation Gowns are individually wrapped for optimal hygiene. Premium-quality protective gowns designed to minimize the risk of cross-contamination Sewn seams and extra-long waist ties for added security Elastic cuffs offer improved protection and easy donning Fluid-resistant, full-coverage, and universally sized to fit a variety of individuals Lightweight, breathable materials provide improved comfort Disposable, individually wrapped for optimal hygiene 2140: CPE/Thumb Loop design helps keep sleeves from sliding up 2144-2148: Impervious, poly-coated material Not made with natural rubber latex

Dynarex DynaSafety CPR Shields and Masks are lightweight, protective barriers designed to help prevent the spread of germs between responders and patients during mouth-to-mouth resuscitation. The Shield features a one-way valve that provides an open airway for rescuers when performing the head-tilt, chin-lift maneuver. The CPR Shield’s one-way valve helps to effectively block blowback to the caregiver during CPR. The Shield is also available with a key-ring pouch for easy portability. An all-in-one kit with CPR mask, vinyl gloves, and optional oxygen port is also available for optimal convenience. Quantity per Case: 100 Serves as a protective barrier to prevent direct contact during CPR Features a one-way-valve to keep blowback from reaching the rescuer Designed from moldable plastic to effectively seal around the nose and mouth Individually poly bagged and constructed from disposable materials for optimal hygiene Not made with natural rubber latex or DEHP 36021: Features convenient key-ring pouch 36022: All-in-one kit includes mask, optional oxygen port, vinyl gloves, and hard case

Dynarex DynaSafety CPR Shields and Masks are lightweight, protective barriers designed to help prevent the spread of germs between responders and patients during mouth-to-mouth resuscitation. The Shield features a one-way valve that provides an open airway for rescuers when performing the head-tilt, chin-lift maneuver. The CPR Shield’s one-way valve helps to effectively block blowback to the caregiver during CPR. The Shield is also available with a key-ring pouch for easy portability. An all-in-one kit with CPR mask, vinyl gloves, and optional oxygen port is also available for optimal convenience. Quantity per Case: 100 Serves as a protective barrier to prevent direct contact during CPR Features a one-way-valve to keep blowback from reaching the rescuer Designed from moldable plastic to effectively seal around the nose and mouth Individually poly bagged and constructed from disposable materials for optimal hygiene Not made with natural rubber latex or DEHP 36021: Features convenient key-ring pouch 36022: All-in-one kit includes mask, optional oxygen port, vinyl gloves, and hard case

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Dynarex DynaSafety CPR Shields and Masks are lightweight, protective barriers designed to help prevent the spread of germs between responders and patients during mouth-to-mouth resuscitation. The Shield features a one-way valve that provides an open airway for rescuers when performing the head-tilt, chin-lift maneuver. The CPR Shield’s one-way valve helps to effectively block blowback to the caregiver during CPR. The Shield is also available with a key-ring pouch for easy portability. An all-in-one kit with CPR mask, vinyl gloves, and optional oxygen port is also available for optimal convenience. Quantity per Case: 25 Serves as a protective barrier to prevent direct contact during CPR Features a one-way-valve to keep blowback from reaching the rescuer Designed from moldable plastic to effectively seal around the nose and mouth Individually poly bagged and constructed from disposable materials for optimal hygiene Not made with natural rubber latex or DEHP 36021: Features convenient key-ring pouch 36022: All-in-one kit includes mask, optional oxygen port, vinyl gloves, and hard case

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Dynarex LabChoice Cryogenic Tubes are designed to safely store and transport biological materials in freezing temperatures. These durable plastic Tubes feature a self-standing design for optimal stability and convenient storage. The externally-threaded Tubes are equipped with a screw cap with silicone gasket for a secure seal. Dynarex Cryogenic Tubes feature a white writing panel for easy labeling and clear graduation marks for accurate measurement. Quantity: 50 per pack, 10 packs per box, 4 boxes per case Designed for safe storage and transport of biological materials in extremely low temperatures Crafted from high-quality plastic materials for optimal durability and reliability Features a screw cap and silicone gasket for a secure, leak-resistant closure Self-standing bottoms provide optimal stability Externally threaded to reduce the risk of contamination Features white writing panel for easy labeling and identification Printed, easy-to-read graduation marks allow for precise measurement Does not contain DNase, RNase, DNA, or pyrogens DO NOT USE IN THE LIQUID PHASE OF LIQUID NITROGEN

Dynarex LabChoice Cryogenic Tubes are designed to safely store and transport biological materials in freezing temperatures. These durable plastic Tubes feature a self-standing design for optimal stability and convenient storage. The externally-threaded Tubes are equipped with a screw cap with silicone gasket for a secure seal. Dynarex Cryogenic Tubes feature a white writing panel for easy labeling and clear graduation marks for accurate measurement. Quantity: 25 per pack, 10 packs per box, 4 boxes per case Designed for safe storage and transport of biological materials in extremely low temperatures Crafted from high-quality plastic materials for optimal durability and reliability Features a screw cap and silicone gasket for a secure, leak-resistant closure Self-standing bottoms provide optimal stability Externally threaded to reduce the risk of contamination Features white writing panel for easy labeling and identification Printed, easy-to-read graduation marks allow for precise measurement Does not contain DNase, RNase, DNA, or pyrogens DO NOT USE IN THE LIQUID PHASE OF LIQUID NITROGEN

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Dynarex CSR Wraps are crafted from durable, non-woven fabric to effectively wrap medical instruments during the sterilization process. These Wraps are designed to provide a barrier against bacteria for optimal protection. Quantity per Case: 1000 Designed to wrap and protect medical instruments during sterilization Suitable for steam and ethylene oxide (EO) gas sterilization Designed to provide an effective barrier against air- and water-borne bacteria Strong, tear-resistant fabric provides improved tensile strength Non-woven material helps to repel water, blood, and saline Folds and drapes easily Available in a variety of sizes

Dynarex CSR Wraps are crafted from durable, non-woven fabric to effectively wrap medical instruments during the sterilization process. These Wraps are designed to provide a barrier against bacteria for optimal protection. Quantity per Case: 1000 Designed to wrap and protect medical instruments during sterilization Suitable for steam and ethylene oxide (EO) gas sterilization Designed to provide an effective barrier against air- and water-borne bacteria Strong, tear-resistant fabric provides improved tensile strength Non-woven material helps to repel water, blood, and saline Folds and drapes easily Available in a variety of sizes

Dynarex CSR Wraps are crafted from durable, non-woven fabric to effectively wrap medical instruments during the sterilization process. These Wraps are designed to provide a barrier against bacteria for optimal protection. Quantity per Case: 500 Designed to wrap and protect medical instruments during sterilization Suitable for steam and ethylene oxide (EO) gas sterilization Designed to provide an effective barrier against air- and water-borne bacteria Strong, tear-resistant fabric provides improved tensile strength Non-woven material helps to repel water, blood, and saline Folds and drapes easily Available in a variety of sizes

Dynarex CSR Wraps are crafted from durable, non-woven fabric to effectively wrap medical instruments during the sterilization process. These Wraps are designed to provide a barrier against bacteria for optimal protection. Quantity per Case: 500 Designed to wrap and protect medical instruments during sterilization Suitable for steam and ethylene oxide (EO) gas sterilization Designed to provide an effective barrier against air- and water-borne bacteria Strong, tear-resistant fabric provides improved tensile strength Non-woven material helps to repel water, blood, and saline Folds and drapes easily Available in a variety of sizes

Dynarex CSR Wraps are crafted from durable, non-woven fabric to effectively wrap medical instruments during the sterilization process. These Wraps are designed to provide a barrier against bacteria for optimal protection. Quantity per Case: 250 Designed to wrap and protect medical instruments during sterilization Suitable for steam and ethylene oxide (EO) gas sterilization Designed to provide an effective barrier against air- and water-borne bacteria Strong, tear-resistant fabric provides improved tensile strength Non-woven material helps to repel water, blood, and saline Folds and drapes easily Available in a variety of sizes

Dynarex CSR Wraps are crafted from durable, non-woven fabric to effectively wrap medical instruments during the sterilization process. These Wraps are designed to provide a barrier against bacteria for optimal protection. Quantity per Case: 250 Designed to wrap and protect medical instruments during sterilization Suitable for steam and ethylene oxide (EO) gas sterilization Designed to provide an effective barrier against air- and water-borne bacteria Strong, tear-resistant fabric provides improved tensile strength Non-woven material helps to repel water, blood, and saline Folds and drapes easily Available in a variety of sizes

Dynarex CSR Wraps are crafted from durable, non-woven fabric to effectively wrap medical instruments during the sterilization process. These Wraps are designed to provide a barrier against bacteria for optimal protection. Quantity per Case: 250 Designed to wrap and protect medical instruments during sterilization Suitable for steam and ethylene oxide (EO) gas sterilization Designed to provide an effective barrier against air- and water-borne bacteria Strong, tear-resistant fabric provides improved tensile strength Non-woven material helps to repel water, blood, and saline Folds and drapes easily Available in a variety of sizes

Dynarex CSR Wraps are crafted from durable, non-woven fabric to effectively wrap medical instruments during the sterilization process. These Wraps are designed to provide a barrier against bacteria for optimal protection. Quantity per Case: 250 Designed to wrap and protect medical instruments during sterilization Suitable for steam and ethylene oxide (EO) gas sterilization Designed to provide an effective barrier against air- and water-borne bacteria Strong, tear-resistant fabric provides improved tensile strength Non-woven material helps to repel water, blood, and saline Folds and drapes easily Available in a variety of sizes

Dynarex CSR Wraps are crafted from durable, non-woven fabric to effectively wrap medical instruments during the sterilization process. These Wraps are designed to provide a barrier against bacteria for optimal protection. Quantity per Case: 100 Designed to wrap and protect medical instruments during sterilization Suitable for steam and ethylene oxide (EO) gas sterilization Designed to provide an effective barrier against air- and water-borne bacteria Strong, tear-resistant fabric provides improved tensile strength Non-woven material helps to repel water, blood, and saline Folds and drapes easily Available in a variety of sizes

Dynarex CSR Wraps are crafted from durable, non-woven fabric to effectively wrap medical instruments during the sterilization process. These Wraps are designed to provide a barrier against bacteria for optimal protection. Quantity per Case: 100 Designed to wrap and protect medical instruments during sterilization Suitable for steam and ethylene oxide (EO) gas sterilization Designed to provide an effective barrier against air- and water-borne bacteria Strong, tear-resistant fabric provides improved tensile strength Non-woven material helps to repel water, blood, and saline Folds and drapes easily Available in a variety of sizes

Dynarex CSR Wraps are crafted from durable, non-woven fabric to effectively wrap medical instruments during the sterilization process. These Wraps are designed to provide a barrier against bacteria for optimal protection. Quantity per Case: 100 Designed to wrap and protect medical instruments during sterilization Suitable for steam and ethylene oxide (EO) gas sterilization Designed to provide an effective barrier against air- and water-borne bacteria Strong, tear-resistant fabric provides improved tensile strength Non-woven material helps to repel water, blood, and saline Folds and drapes easily Available in a variety of sizes

Dynarex LabChoice Culture Tubes with Dual Position Caps are designed to provide a controlled environment for cell and tissue culture growth. The Tubes are equipped with dual-position caps, allowing for aerobic culture in the loose position and anaerobic culture when sealed. The ribbed plastic cap design allows for enhanced grip and easier handling. Constructed from premium polystyrene materials, these Culture Tubes are crafted for increased durability and reliability. The Tubes are made from transparent materials to provide optimal clarity and visibility of contents. Dynarex LabChoice Culture Tubes with Dual Position Caps are available with or without printed graduations and marking areas, offering flexibility to suit various preferences. Quantity: 25 per bag, 4 bags per case Sterile tubes designed to provide a controlled environment for culture growth Dual-position cap offers both aerobic and anaerobic conditions Constructed from premium polystyrene materials for optimal durability Ribbed plastic cap provides enhanced grip and easier handling Transparent design allows for improved clarity for monitoring contents Available with or without printed graduations and marking area

Dynarex LabChoice Culture Tubes with Dual Position Caps are designed to provide a controlled environment for cell and tissue culture growth. The Tubes are equipped with dual-position caps, allowing for aerobic culture in the loose position and anaerobic culture when sealed. The ribbed plastic cap design allows for enhanced grip and easier handling. Constructed from premium polystyrene materials, these Culture Tubes are crafted for increased durability and reliability. The Tubes are made from transparent materials to provide optimal clarity and visibility of contents. Dynarex LabChoice Culture Tubes with Dual Position Caps are available with or without printed graduations and marking areas, offering flexibility to suit various preferences. Quantity: 25 per bag, 4 bags per case Sterile tubes designed to provide a controlled environment for culture growth Dual-position cap offers both aerobic and anaerobic conditions Constructed from premium polystyrene materials for optimal durability Ribbed plastic cap provides enhanced grip and easier handling Transparent design allows for improved clarity for monitoring contents Available with or without printed graduations and marking area

Dynarex LabChoice Culture Tubes with Dual Position Caps are designed to provide a controlled environment for cell and tissue culture growth. The Tubes are equipped with dual-position caps, allowing for aerobic culture in the loose position and anaerobic culture when sealed. The ribbed plastic cap design allows for enhanced grip and easier handling. Constructed from premium polystyrene materials, these Culture Tubes are crafted for increased durability and reliability. The Tubes are made from transparent materials to provide optimal clarity and visibility of contents. Dynarex LabChoice Culture Tubes with Dual Position Caps are available with or without printed graduations and marking areas, offering flexibility to suit various preferences. Quantity: 500 per case, individually wrapped Sterile tubes designed to provide a controlled environment for culture growth Dual-position cap offers both aerobic and anaerobic conditions Constructed from premium polystyrene materials for optimal durability Ribbed plastic cap provides enhanced grip and easier handling Transparent design allows for improved clarity for monitoring contents Available with or without printed graduations and marking area