Products

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Dynarex Full Bed Rail Bumpers are premium, padded rail guards designed to provide a protective buffer between patients and full-length bed rails to help reduce the risk of injury. These high-quality pads fasten effortlessly with hook and loop closures and feature a water-resistant non-allergenic vinyl cover that is easy to clean for worry-free maintenance. Soft, high-density foam pads cushion bed rails to help prevent injury Designed to help fill gaps between mattress and side rails Easy to install with hook-and-loop closures Lightweight, foldable pads are easy to transport and store Non-allergenic and water-resistant Vinyl cover wipes clean for easy maintenance 70” length to fit full bed rails

Dynarex Full Bed Rail Bumpers are premium, padded rail guards designed to provide a protective buffer between patients and full-length bed rails to help reduce the risk of injury. These high-quality pads fasten effortlessly with hook and loop closures and feature a water-resistant non-allergenic vinyl cover that is easy to clean for worry-free maintenance. Soft, high-density foam pads cushion bed rails to help prevent injury Designed to help fill gaps between mattress and side rails Easy to install with hook-and-loop closures Lightweight, foldable pads are easy to transport and store Non-allergenic and water-resistant Vinyl cover wipes clean for easy maintenance 70” length to fit full bed rails

Dynarex Full Body Mesh Slings are manufactured from high-quality, durable materials to provide safe, reliable support during patient transfers. The Slings are designed with breathable, easy-to-clean mesh fabric for improved patient comfort and convenience. The Slings can be used in conjunction with most electric patient lifts to safely accommodate patient transfers from a variety of surfaces, including wheelchairs, beds, and floors. Quantity per Case: 1 Designed to assist in safe patient transfers from bed, wheelchair, or floor Manufactured from strong, durable fabric for reliable support Features breathable mesh material for optimal comfort Designed to fit most electric patient lifts for optimal versatility Features convenient back strap for easier positioning Integrated color-coded hooks help assure correct patient positioning Color-coded perimeter bindings allow for easy size-identification Ideal for use in a variety of long-term care settings Weight capacity 600 lb. 10740XXXL: Weight capacity 1000 lb.

Dynarex Full Body Mesh Slings are manufactured from high-quality, durable materials to provide safe, reliable support during patient transfers. The Slings are designed with breathable, easy-to-clean mesh fabric for improved patient comfort and convenience. The Slings can be used in conjunction with Dynarex electric patient lifts to safely accommodate patient transfers from a variety of surfaces, including wheelchairs, beds, and floors. Quantity per Case: 1 Designed to assist in safe patient transfers from bed, wheelchair, or floor Manufactured from strong, durable fabric for reliable support Features breathable mesh material for optimal comfort Designed to fit most electric patient lifts for optimal versatility Features convenient back strap for easier positioning Integrated color-coded hooks help assure correct patient positioning Color-coded perimeter bindings allow for easy size-identification Ideal for use in a variety of long-term care settings Weight capacity 600 lb. 10740XXXL: Weight capacity 1000 lb.

Dynarex Full Body Mesh Slings are manufactured from high-quality, durable materials to provide safe, reliable support during patient transfers. The Slings are designed with breathable, easy-to-clean mesh fabric for improved patient comfort and convenience. The Slings can be used in conjunction with Dynarex electric patient lifts to safely accommodate patient transfers from a variety of surfaces, including wheelchairs, beds, and floors. Quantity per Case: 1 Designed to assist in safe patient transfers from bed, wheelchair, or floor Manufactured from strong, durable fabric for reliable support Features breathable mesh material for optimal comfort Designed to fit most electric patient lifts for optimal versatility Features convenient back strap for easier positioning Integrated color-coded hooks help assure correct patient positioning Color-coded perimeter bindings allow for easy size-identification Ideal for use in a variety of long-term care settings Weight capacity 600 lb. 10740XXXL: Weight capacity 1000 lb.

Dynarex Full Body Solid Fabric Slings are constructed from bonded polyester materials with an inner suede layer for maximum durability and patient comfort. The Slings are designed to be used in conjunction with electric patient lifts to safely accommodate patient transfers from a variety of surfaces, including wheelchairs, beds, and floors. Quantity per Case: 1 Designed to assist in safe patient transfers from bed, wheelchair, or floor Manufactured from strong, durable fabric for reliable support Features solid polyester materials with suede inner layer for moisture wicking Designed to fit most electric patient lifts for optimal versatility Features convenient back strap for easier positioning Integrated color-coded hooks help assure correct patient positioning Color-coded perimeter bindings allow for easy size-identification Ideal for use in a variety of long-term care settings Weight capacity: 600 lb.

Dynarex Full Body Solid Fabric Slings are constructed from bonded polyester materials with an inner suede layer for maximum durability and patient comfort. The Slings are designed to be used in conjunction with electric patient lifts to safely accommodate patient transfers from a variety of surfaces, including wheelchairs, beds, and floors. Quantity per Case: 1 Designed to assist in safe patient transfers from bed, wheelchair, or floor Manufactured from strong, durable fabric for reliable support Features solid polyester materials with suede inner layer for moisture wicking Designed to fit most electric patient lifts for optimal versatility Features convenient back strap for easier positioning Integrated color-coded hooks help assure correct patient positioning Color-coded perimeter bindings allow for easy size-identification Ideal for use in a variety of long-term care settings Weight capacity: 600 lb.

Dynarex Full Body Solid Fabric Slings are constructed from bonded polyester materials with an inner suede layer for maximum durability and patient comfort. The Slings are designed to be used in conjunction with electric patient lifts to safely accommodate patient transfers from a variety of surfaces, including wheelchairs, beds, and floors. Quantity per Case: 1 Designed to assist in safe patient transfers from bed, wheelchair, or floor Manufactured from strong, durable fabric for reliable support Features solid polyester materials with suede inner layer for moisture wicking Designed to fit most electric patient lifts for optimal versatility Features convenient back strap for easier positioning Integrated color-coded hooks help assure correct patient positioning Color-coded perimeter bindings allow for easy size-identification Ideal for use in a variety of long-term care settings Weight capacity: 600 lb.

Dynarex Full Body Slings with Commode Opening are made from breathable mesh material that is easy to wash and are designed to be used for toileting purposes. The toileting sling accommodates individuals up to 600 lb. and transfers patients from a variety of surfaces including out of a bed or wheelchair. Quantity per Case: 1 Designed to assist in safe patient transfers and allow for toileting needs Strong, durable fabric for reliable support for transfers from bed, wheelchair, or floor Features breathable mesh material for optimal comfort Designed to fit most electric patient lifts for optimal versatility Features convenient back strap for easier positioning Color-coded perimeter bindings allow for easy size-identification Ideal for use in a variety of long-term care settings Weight capacity 600 lb.

Dynarex Full Body Slings with Commode Opening are made from breathable mesh material that is easy to wash, and are designed to be used for toileting purposes. The toileting sling accommodates individuals up to 600 lb. and transfers patients from a variety of surfaces including out of a bed or wheelchair. Quantity per Case: 1 Designed to assist in safe patient transfers and allow for toileting needs Strong, durable fabric for reliable support for transfers from bed, wheelchair, or floor Features breathable mesh material for optimal comfort Designed to fit most electric patient lifts for optimal versatility Features convenient back strap for easier positioning Color-coded perimeter bindings allow for easy size-identification Ideal for use in a variety of long-term care settings Weight capacity 600 lb.

Dynarex Full Body Slings with Commode Opening are made from breathable mesh material that is easy to wash, and are designed to be used for toileting purposes. The toileting sling accommodates individuals up to 600 lb. and transfers patients from a variety of surfaces including out of a bed or wheelchair. Quantity per Case: 1 Designed to assist in safe patient transfers and allow for toileting needs Strong, durable fabric for reliable support for transfers from bed, wheelchair, or floor Features breathable mesh material for optimal comfort Designed to fit most electric patient lifts for optimal versatility Features convenient back strap for easier positioning Color-coded perimeter bindings allow for easy size-identification Ideal for use in a variety of long-term care settings Weight capacity 600 lb.

Dynarex Chair Covers are high-quality plastic coverings designed to provide an efficient sanitary barrier for tattooing and dental chairs. These fluid-resistant Covers offer effective coverage to help keep the chair clean and dry. These clear plastic sleeves slide easily on and off for added convenience and quick disposal. Dynarex Chair Covers help to shield the chair from the damaging effects of disinfectants such as cracking or fading. Clear plastic coverings designed to provide an effective, sanitary barrier Manufactured from water-resistant materials to help keep chair dry and clean Convenient sleeve design slides easily on and off for easy disposal Provides reliable coverage to help resist the damaging effect of disinfectants Ideal for tattoo and dental chairs Disposable for optimal hygiene Not made with natural rubber latex or DEHP

The Dynarex Full-Electric Homecare Bed is built for strength, flexibility, and ease of use in homecare settings. The durable steel frame provides lasting support, while the spring deck offers stable mattress placement and comfort. A split-frame design allows for easier transport and setup. Head and foot sections are controlled by a lightweight hand pendant, and the motor can be removed without repositioning the patient. The bed is compatible with a 9-volt battery for emergency adjustments during power loss, and most frame components are designed for universal compatibility to simplify part replacement and maintenance. Durable steel frame with spring deck offers strength, stability, and comfort Split-frame design allows for easier transport and setup Height adjusts from 15.7"–22.8" for safer transfers and patient access Lightweight hand pendant controls head and foot positioning Ultra-quiet motor can be removed without displacing patient; operates on 9-volt battery during outages Scratch-resistant woodgrain head and footboards provide lasting durability Equipped with four 3" casters for smooth mobility and positioning Compatible frame components simplify part replacement and maintenance HCPC codes available for bed and bed packages Weight capacity 450 lb. Limited Lifetime Warranty on welds, 5 years on frame, 1 year on all other components

The Dynarex Full-Electric Homecare Bed is built for strength, flexibility, and ease of use in homecare settings. The durable steel frame provides lasting support, while the spring deck offers stable mattress placement and comfort. A split-frame design allows for easier transport and setup. Head and foot sections are controlled by a lightweight hand pendant, and the motor can be removed without repositioning the patient. The bed is compatible with a 9-volt battery for emergency adjustments during power loss, and most frame components are designed for universal compatibility to simplify part replacement and maintenance. Durable steel frame with spring deck offers strength, stability, and comfort Split-frame design allows for easier transport and setup Height adjusts from 15.7"–22.8" for safer transfers and patient access Lightweight hand pendant controls head and foot positioning Ultra-quiet motor can be removed without displacing patient; operates on 9-volt battery during outages Scratch-resistant woodgrain head and footboards provide lasting durability Equipped with four 3" casters for smooth mobility and positioning Compatible frame components simplify part replacement and maintenance HCPC codes available for bed and bed packages Weight capacity 450 lb. Limited Lifetime Warranty on welds, 5 years on frame, 1 year on all other components

The Dynarex Full-Electric Homecare Bed is built for strength, flexibility, and ease of use in homecare settings. The durable steel frame provides lasting support, while the spring deck offers stable mattress placement and comfort. A split-frame design allows for easier transport and setup. Head and foot sections are controlled by a lightweight hand pendant, and the motor can be removed without repositioning the patient. The bed is compatible with a 9-volt battery for emergency adjustments during power loss, and most frame components are designed for universal compatibility to simplify part replacement and maintenance. Durable steel frame with spring deck offers strength, stability, and comfort Split-frame design allows for easier transport and setup Height adjusts from 15.7"–22.8" for safer transfers and patient access Lightweight hand pendant controls head and foot positioning Ultra-quiet motor can be removed without displacing patient; operates on 9-volt battery during outages Scratch-resistant woodgrain head and footboards provide lasting durability Equipped with four 3" casters for smooth mobility and positioning Compatible frame components simplify part replacement and maintenance HCPC codes available for bed and bed packages Weight capacity 450 lb. Limited Lifetime Warranty on welds, 5 years on frame, 1 year on all other components

The Dynarex Full-Electric Homecare Bed is built for strength, flexibility, and ease of use in homecare settings. The durable steel frame provides lasting support, while the spring deck offers stable mattress placement and comfort. A split-frame design allows for easier transport and setup. Head and foot sections are controlled by a lightweight hand pendant, and the motor can be removed without repositioning the patient. The bed is compatible with a 9-volt battery for emergency adjustments during power loss, and most frame components are designed for universal compatibility to simplify part replacement and maintenance. Durable steel frame with spring deck offers strength, stability, and comfort Split-frame design allows for easier transport and setup Height adjusts from 15.7"–22.8" for safer transfers and patient access Lightweight hand pendant controls head and foot positioning Ultra-quiet motor can be removed without displacing patient; operates on 9-volt battery during outages Scratch-resistant woodgrain head and footboards provide lasting durability Equipped with four 3" casters for smooth mobility and positioning Compatible frame components simplify part replacement and maintenance HCPC codes available for bed and bed packages Weight capacity 450 lb. Limited Lifetime Warranty on welds, 5 years on frame, 1 year on all other components

The Dynarex Full-Electric Homecare Bed is built for strength, flexibility, and ease of use in homecare settings. The durable steel frame provides lasting support, while the spring deck offers stable mattress placement and comfort. A split-frame design allows for easier transport and setup. Head and foot sections are controlled by a lightweight hand pendant, and the motor can be removed without repositioning the patient. The bed is compatible with a 9-volt battery for emergency adjustments during power loss, and most frame components are designed for universal compatibility to simplify part replacement and maintenance. Durable steel frame with spring deck offers strength, stability, and comfort Split-frame design allows for easier transport and setup Height adjusts from 15.7"–22.8" for safer transfers and patient access Lightweight hand pendant controls head and foot positioning Ultra-quiet motor can be removed without displacing patient; operates on 9-volt battery during outages Scratch-resistant woodgrain head and footboards provide lasting durability Equipped with four 3" casters for smooth mobility and positioning Compatible frame components simplify part replacement and maintenance HCPC codes available for bed and bed packages Weight capacity 450 lb. Limited Lifetime Warranty on welds, 5 years on frame, 1 year on all other components

The Dynarex Full-Electric Homecare Bed is built for strength, flexibility, and ease of use in homecare settings. The durable steel frame provides lasting support, while the spring deck offers stable mattress placement and comfort. A split-frame design allows for easier transport and setup. Head and foot sections are controlled by a lightweight hand pendant, and the motor can be removed without repositioning the patient. The bed is compatible with a 9-volt battery for emergency adjustments during power loss, and most frame components are designed for universal compatibility to simplify part replacement and maintenance. Durable steel frame with spring deck offers strength, stability, and comfort Split-frame design allows for easier transport and setup Height adjusts from 15.7"–22.8" for safer transfers and patient access Lightweight hand pendant controls head and foot positioning Ultra-quiet motor can be removed without displacing patient; operates on 9-volt battery during outages Scratch-resistant woodgrain head and footboards provide lasting durability Equipped with four 3" casters for smooth mobility and positioning Compatible frame components simplify part replacement and maintenance HCPC codes available for bed and bed packages Weight capacity 450 lb. Limited Lifetime Warranty on welds, 5 years on frame, 1 year on all other components

The Dynarex Full-Electric Homecare Bed is built for strength, flexibility, and ease of use in homecare settings. The durable steel frame provides lasting support, while the spring deck offers stable mattress placement and comfort. A split-frame design allows for easier transport and setup. Head and foot sections are controlled by a lightweight hand pendant, and the motor can be removed without repositioning the patient. The bed is compatible with a 9-volt battery for emergency adjustments during power loss, and most frame components are designed for universal compatibility to simplify part replacement and maintenance. Durable steel frame with spring deck offers strength, stability, and comfort Split-frame design allows for easier transport and setup Height adjusts from 15.7"–22.8" for safer transfers and patient access Lightweight hand pendant controls head and foot positioning Ultra-quiet motor can be removed without displacing patient; operates on 9-volt battery during outages Scratch-resistant woodgrain head and footboards provide lasting durability Equipped with four 3" casters for smooth mobility and positioning Compatible frame components simplify part replacement and maintenance HCPC codes available for bed and bed packages Weight capacity 450 lb. Limited Lifetime Warranty on welds, 5 years on frame, 1 year on all other components

The Dynarex Full-Electric Homecare Bed is built for strength, flexibility, and ease of use in homecare settings. The durable steel frame provides lasting support, while the spring deck offers stable mattress placement and comfort. A split-frame design allows for easier transport and setup. Head and foot sections are controlled by a lightweight hand pendant, and the motor can be removed without repositioning the patient. The bed is compatible with a 9-volt battery for emergency adjustments during power loss, and most frame components are designed for universal compatibility to simplify part replacement and maintenance. Durable steel frame with spring deck offers strength, stability, and comfort Split-frame design allows for easier transport and setup Height adjusts from 15.7"–22.8" for safer transfers and patient access Lightweight hand pendant controls head and foot positioning Ultra-quiet motor can be removed without displacing patient; operates on 9-volt battery during outages Scratch-resistant woodgrain head and footboards provide lasting durability Equipped with four 3" casters for smooth mobility and positioning Compatible frame components simplify part replacement and maintenance HCPC codes available for bed and bed packages Weight capacity 450 lb. Limited Lifetime Warranty on welds, 5 years on frame, 1 year on all other components

The Dynarex Full-Electric Homecare Bed is built for strength, flexibility, and ease of use in homecare settings. The durable steel frame provides lasting support, while the spring deck offers stable mattress placement and comfort. A split-frame design allows for easier transport and setup. Head and foot sections are controlled by a lightweight hand pendant, and the motor can be removed without repositioning the patient. The bed is compatible with a 9-volt battery for emergency adjustments during power loss, and most frame components are designed for universal compatibility to simplify part replacement and maintenance. Durable steel frame with spring deck offers strength, stability, and comfort Split-frame design allows for easier transport and setup Height adjusts from 15.7"–22.8" for safer transfers and patient access Lightweight hand pendant controls head and foot positioning Ultra-quiet motor can be removed without displacing patient; operates on 9-volt battery during outages Scratch-resistant woodgrain head and footboards provide lasting durability Equipped with four 3" casters for smooth mobility and positioning Compatible frame components simplify part replacement and maintenance HCPC codes available for bed and bed packages Weight capacity 450 lb. Limited Lifetime Warranty on welds, 5 years on frame, 1 year on all other components

The Dynarex Full Length Face Shield helps protect you from exposure to non-hazardous liquids while keeping your vision clear. The transparent plastic shield features a wraparound design that allows for full peripheral vision. Its anti-fog coating reduces clouding in humid environments, so you can concentrate on the task at hand. The roomy shield fits easily over prescription or protective glasses, so there’s no need to remove your eyewear to use the face shield. The elastic headband features soft foam padding to keep you comfortable. Protects against non-hazardous fluids and particulates Wrap-around design provides unobstructed peripheral view Fits easily over prescription glasses or protective eyewear Anti-fog coating reduces clouding Elastic headband is lined with comfortable foam Disposable