Products

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

LibertyPRO™ Exam Chair with Manual Back, 650-lb Weight Capacity, ADA 17-inch Low Seat Height, Programmable Foot Control, Front Storage Drawer, Drain Pan, Stirrups, Pelvic Tilt, Standard Base, and Classic Upholstery

LibertyPRO™ Exam Chair with Manual Back, 650-lb Weight Capacity, ADA 17-inch Low Seat Height, Programmable Foot & Hand Controls, Front & Reversible Side Storage Drawers, Drain Pan, Stirrups, Pelvic Tilt, Two Dual Electrical Receptacles, Standard Base and Classic Upholstery

LibertyPRO™ Exam Chair with Manual Back, 650-lb Weight Capacity, ADA 17-inch Low Seat Height, Programmable Foot & Hand Controls, Front & Reversible Side Storage Drawers, Drawer Warmer, Drain Pan, Stirrups, Pelvic Tilt, Two Dual Electrical Receptacles, OneTouch WheelBase System, and Classic Upholstery

The LibertyPRO™ Exam Chair from UMF Medical is a high-performance, ADA-compliant solution designed for accessible, dignified care. With a low 17-inch seat height, manual or power back options, and TruComfort+™ Support Rails for more accurate blood pressure readings, LibertyPRO™ helps facilities deliver more equitable care while protecting staff and budget.

LibertyPRO™ Exam Chair with Power Back, 650-lb Weight Capacity, ADA 17-inch Low Seat Height, Programmable Foot & Hand Controls, Front & Reversible Side Storage Drawers, Drain Pan, Stirrups, Pelvic Tilt, Two Dual Electrical Receptacles, Standard Base and Classic Upholstery

LibertyPRO™ Exam Chair with Power Back, 650-lb Weight Capacity, ADA 17-inch Low Seat Height, Programmable Foot & Hand Controls, Front & Reversible Side Storage Drawers, Drain Pan, Stirrups, Pelvic Tilt, Two Dual Electrical Receptacles, Standard Base and Classic Upholstery

Aches and pains can slow you down, but the WeCare™ by Dynarex Lidocaine Pain Relief Gel Patch can help. The lidocaine patches have anesthetic properties to give users fast-acting, mess-free pain relief. The patches start working in minutes, targeting inflamed nerves directly, to beat pain at the source. Compare WeCare™ by Dynarex Lidocaine Pain Relief Gel Patch to Salonpas® Lidocaine Pain Relieving Gel-Patch. Maximum strength patches provide fast acting, numbing relief 4% Lidocaine temporarily relieves minor aches and pains Long lasting and odor free Patches measure 3.9” x 5.5” Compare WeCare™ by Dynarex Lidocaine Pain Relief Gel Patch to Salonpas® Lidocaine Pain Relieving Gel-Patch

The Dynarex Bari+Max Patient Lift Scale is engineered to allow caregivers to monitor the weight of patients during standard transfers. The Scale eliminates the necessity to transfer patients to a floor scale. Allows patient’s weight to be monitored during transfers Battery operated Weighs patients up to 1000 lb. Limited Lifetime Warranty

Dynarex LabChoice Pipette Stands are premium lab stands designed to safely hold pipettes upright to minimize the risk of cross-contamination. The Pipette Stands are crafted from high-quality polyethylene materials for enhanced durability. The Stands feature a sturdy base to reliably support up to six pipettes. Compatible with both single and multichannel pipettors, these versatile Stands are available in either a linear or carousel design to suit a variety of needs. Quantity: 1 per case Designed to hold pipettes upright to minimize the risk of cross contamination Crafted from high-quality polyethylene for optimal durability Sturdy base reliably holds up to six pipettes Compatible with both single and multichannel pipettors Linear and Carousel styles available

Features & Benefits Capability: Holds up to 50 gallons of waste, ideal for high-traffic indoor areas. Long-Lasting: The rigid plastic construction can handle daily wear and tear, ensuring the liner’s longevity. Compatibility: It is specifically designed to fit our 50 Gallon Stainless Steel Trash Can seamlessly. Design: The liner features a wide-open top with handles for easy trash disposal and bag changes. Cleanliness: Helps keep your stainless steel receptacle clean and prevents leaks or trash bag breakages from flooding your receptacle.

Dynarex Resp-O2™ Laryngeal Mask Airways (LMA) are high-quality respiratory devices designed to keep patients’ airways open in critical care situations and during the administration of anesthesia. The Laryngeal Mask Airway features a contoured, inflatable cuff to help provide a direct, sealed route to the lungs. The LMA’s simple design makes it relatively easy to place and allows for blind intubation, even by less experienced practitioners. Inflatable cuff fills oral pharynx to help protect airway Soft materials and contoured design help reduce throat irritation Ideal for use during the administration of anesthesia Allows for relatively easy placement and blind intubation Translucent tubing and depth marks allow for accurate placement Reinforced with wire coil for optimal support and reduced risk of kinking Single-use mask is sterile and x-ray detectable

Dynarex Resp-O2™ Laryngeal Mask Airways (LMA) are high-quality respiratory devices designed to keep patients’ airways open in critical care situations and during the administration of anesthesia. The Laryngeal Mask Airway features a contoured, inflatable cuff to help provide a direct, sealed route to the lungs. The LMA’s simple design makes it relatively easy to place and allows for blind intubation, even by less experienced practitioners. Inflatable cuff fills oral pharynx to help protect airway Soft materials and contoured design help reduce throat irritation Ideal for use during the administration of anesthesia Allows for relatively easy placement and blind intubation Translucent tubing and depth marks allow for accurate placement Reinforced with wire coil for optimal support and reduced risk of kinking Single-use mask is sterile and x-ray detectable

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

The Dynarex Low Overbed Table is a durable, steel table constructed for user convenience when in a low bed. The height-adjustable base is easy to operate and accommodates most low beds. Simply lift the tabletop to adjust table height to a user’s personal preference and securely lock into place. The H-Base frame is designed to slide underneath the bed so users can enjoy increased access to their meals and belongings from a seated or reclining position. Often used at home, retirement homes, rehabilitation facilities, hospitals, and more. Heavy duty, steel-welded H-style frame Spring-loaded locking lift mechanism adjusts table height: 21"-29" Four 2.5” swivel casters for maximum maneuverability Two locking casters provide added stability Distributed tabletop weight capacity 50 lb.