Products

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

The SureDry Scope Drying Cabinet includes the industry best Positive Pressure HEPA Filtered Drying system. Inside air is replaced inside the cabinet 4 times per minute. Meets or exceeds Joint Commission, AORN, SGNA, and AAMI guidelines.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

The SC8036TD-T3316D incorporates a state of the art scope cabinet tracking system that maintains records of scope drying events, user access, check-ins, check-outs and tracks other customizable settings unique to each endoscope. At a glance the color touch screen digital display, accessed by an authorized passcode, displays scope inventory, reprocessing status, scope processing times and adjustable timing options including drying time, pre-drying time, venting time, hang time limits and more. The scope tracking cabinet itself dries endoscope exteriors with HEPA filtered positive pressure forced air, using three intake fans and two exhaust fans. The Dri-Scope Aid® system, the industry leading internal lumen drying system, pumps additional HEPA filtered air through the internal endoscope channels to fulfill forced air recommendations based on AORN, SGNA and AAMI guidelines (including ANSI/AAMI ST91:2021 updated guidelines). This scope drying and tracking cabinet provides a complete solution for facilities requiring optimal endoscope drying capabilities combined with high level digital tracking features.

This SureDry smart scope cabinet with an integrated scope cabinet tracking system has a fourteen scope capacity and includes the industry best positive pressure HEPA filtered drying system. Inside air is replaced inside the cabinet up to four times per minute. This scope cabinet tracking cabinet meets or exceeds AORN, SGNA, and AAMI guidelines. SC8036TD-T3316D: 36” drying and tracking cabinet built for reprocessing teams that want visibility, accountability and workflow control The following insights reflect common themes heard from GI teams, SPD leaders and procedural buyers looking for more than a drying cabinet—often describing this model as a workflow management tool built around scope protection, documentation and compliance. How clinical teams describe this cabinet in practice This model is often chosen by departments ready to move from passive storage and drying into actively managed scope workflow. You’ll hear feedback framed like: “It doesn’t just dry scopes—it helps us manage them.” “The tracking capability changed how our team handles accountability.” “It feels less like a cabinet purchase and more like adding process control.” Clinical teams often describe the appeal as combining three priorities in one system: dependable storage capacity, full internal channel drying with Dri-Scope Aid®, and scope tracking that supports day-to-day operational discipline. Why teams choose Tracker + Dri-Scope Aid® The major differentiator is how this model blends drying performance with procedural oversight. Teams often highlight the value of: Exterior scope drying plus active internal channel/lumen drying Scope check-in/check-out tracking for chain-of-custody visibility Drying time monitoring and documentation support Improved traceability across reprocessing workflows Added confidence when managing shared scope inventories Common feedback sounds like: “We wanted drying assurance, but also visibility into where scopes are and how they’re moving.” “Tracking reduced a lot of manual workarounds.” “It supports compliance and helps improve our workflow.” Rather than functioning solely as storage, many teams view this cabinet as supporting a more standardized workflow GI nurses and reprocessing staff can actively use. Workflow fit: where this model tends to stand out This model is often selected by facilities where drying performance alone is not the only buying driver. It tends to resonate with teams managing: Higher-volume GI and endoscopy programs Facilities preparing for growing traceability expectations Programs trying to reduce manual tracking steps and process variation This scope cabinet combines robust 14-scope capacity with Harloff advantages they rely on—wide spacing between scopes, positive pressure HEPA-filtered drying with frequent air exchange, adjustable fan run times, easy-maintenance drip trays, plug-and-play upgrade flexibility, and long-term durability backed by Harloff’s 12-year warranty. Many describe it as “workflow technology inside a proven cabinet platform.” Who this cabinet is really for The SC8036TD-T3316D is typically chosen by buyers who: Want 14-scope capacity with both external and internal channel drying Need tracking functionality to support accountability and documentation View scope storage as part of a broader reprocessing workflow, not a standalone product Want a cabinet that supports clinical teams operationally, not just technically Are looking for a scalable, compliance-minded solution without sacrificing day-to-day usability Bottom line Clinical teams often see this model as the step from drying cabinet to managed workflow system.

Harloff’s standard SureDry cabinet provides positive pressure, HEPA filtered air to quickly dry the exterior of freshly rinsed endoscopes during reprocessing. When coupled with the Dri-Scope Aid® system, Harloff’s scope cabinet also uses simple-to-attach scope connectors to send forced air through all endoscope channels to make sure that both interior and exterior surfaces are properly dried. This next generation “Tracker” endoscope tracking system from Dri-Scope Aid® adds yet another component, the ability to monitor the drying process and to display staff check-ins/check-outs and other scope functions using a built in touch tablet that is configured to your scope inventory and ready to run immediately on cabinet delivery. This “Tracker” system also includes a customizable hang time monitor with an intelligent automated scheduler that vents a cycle of air through all dry endoscopes as long as they remain checked into the system. Other capabilities of this smart endoscope drying and tracking cabinet include inventory overviews at a glance, customizable drying options with unique settings for each scope and downloadable export files available for endoscope management, user lists and more. This complete endoscope tracking system helps to meet or exceed AORN, SGNA and AAMI guidelines (including ANSI/AAMI ST91:2021 updated guidelines) when included as part of your endoscope reprocessing workflow.

This SureDry endoscope drying and tracking cabinet with a fourteen scope capacity includes the industry best positive pressure HEPA filtered drying system. Inside air is replaced inside the cabinet up to four times per minute. This endoscope cabinet tracking system meets or exceeds AORN, SGNA, and AAMI guidelines. SCSS8036TD-T3316D: stainless steel drying and tracking cabinet for teams prioritizing workflow control with premium material performance The following reflects how GI teams, SPD leaders and medical staff often position this model when they want the full benefits of the 36” Tracker + Dri-Scope Aid® platform, but prefer stainless steel construction for environmental, durability or infection prevention reasons. How clinical teams describe this cabinet in practice This model is often viewed as the premium-material version of a highly process-driven workflow cabinet. You’ll hear feedback framed like: “We wanted the tracking and drying capabilities, but in stainless for our environment.” “It gave us the procedural workflow tools we wanted with a material our team already trusts.” “It feels built for facilities that think long-term.” Clinical teams often describe this model as taking a proven drying and tracking platform and elevating it for departments with stricter material preferences, aggressive cleaning protocols or premium equipment standards. For many buyers, it is as much about the cabinet’s construction as its features. Why teams choose stainless steel in this platform The biggest differentiator is combining workflow technology with the advantages of stainless steel construction. Teams often highlight: Corrosion resistance against bio-contaminants and harsh sanitizing agents Smooth, non-porous surfaces that support cleaning and disinfection Strong durability in demanding clinical environments Long service life that can improve total cost of ownership Material consistency often preferred in high-acuity settings Common feedback sounds like: “It aligns with the material standards we use elsewhere in sterile environments.” “We saw stainless as a longevity investment.” “It gives a level of cleanability and durability our team values.” Some teams also note aesthetic preference matters—particularly where equipment appearance, premium finishes or operating-room-adjacent environments influence purchasing decisions. Many buyers acknowledge the tradeoff as well: stainless shows fingerprints and smudging more visibly, but teams who choose it often see that as minor compared with its durability and cleanability advantages. Workflow fit: where this model tends to stand out Beyond material construction, this remains a full workflow-oriented drying solution, combining: 14-scope capacity with generous spacing between scopes Positive pressure HEPA-filtered drying with frequent air exchange Dri-Scope Aid® internal channel drying Tracker functionality for check-in/check-out visibility and drying documentation Plug-and-play flexibility, easy maintenance and long-term uptime Teams often describe it as well suited for: High-volume endoscopy and GI departments Facilities standardizing premium or stainless equipment platforms Programs prioritizing traceability and process control Buyers focused on longevity and lifecycle value, not just acquisition cost Many see it as moving beyond “cabinet plus features” into a durable procedural workflow asset. Who this cabinet is really for The SCSS8036TD-T3316D is typically chosen by teams who: Want drying, tracking and accountability in one integrated system Prefer stainless steel for corrosion resistance, cleanability or durability Are buying for long-term lifecycle performance Value premium material construction alongside compliance-focused workflow tools Need a solution that supports both clinical rigor and operational efficiency Bottom line Clinical teams often describe this model as the premium, stainless version of a proven workflow cabinet—combining Dri-Scope Aid®, Tracker visibility and robust 36” capacity with the durability and cleanability advantages that make stainless steel a trusted choice in demanding healthcare environments.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Harloff’s SC8044DREDP-DSS3316 internal lumen scope drying cabinet is the industry’s most spacious scope cabinet that allows for easy hanging and retrieval of all types of endoscopes. Each sizeable cabinet can hold up to 16 endoscopes behind its tempered glass double doors thanks to Harloff’s secure adjustable mounting system. The industry’s only unit with 3 intake and 2 exhaust fans, the cabinet’s positive pressure fully redundant fan system utilizes a HEPA filter that removes 99.7% of particulates to ensure all scopes are kept as clean as possible. Fan run times are fully adjustable and reactivated each time a cabinet door is closed. A keyless electronic pushbutton lock is the standard locking option for this heat sealed powder coat steel cabinet, however multiple lock options are available including badge entry.

SureDry Scope Cabinets feature an external HEPA filtered positive pressure drying system combined with DriScope Aid®, the industry leading system for any internal lumen scope drying cabinet. This combination provides the assurance that facilities will be able to meet all current and anticipated future guidelines for external and internal drying of endoscopes, providing patients with the best possible assurance of infection prevention. The Dri-Scope Aid® cabinet supplies HEPA-filtered air to all internal channels to aid in drying endoscopes with an automated drying cycle for improved turn-around time, and a continuous venting cycle for overnight storage. SC8044DREDP-DSS3316: high-volume 44” channel drying cabinet with electronic access for teams balancing throughput, drying assurance and controlled security The following reflects how GI teams and reprocessing leaders often describe this model when they want the spaciousness of the 44” high-volume platform, the protection of Dri-Scope Aid®, and the practical security upgrade of electronic access control. How clinical teams describe this cabinet in practice This model is often viewed as the high-volume workhorse upgraded in the three areas busy departments care about most: capacity, drying performance and access control. You’ll hear feedback framed like: “It gives us the throughput we need, with the channel drying we now consider essential.” “The spacing improves handling, while Dri-Scope Aid® improves confidence.” “The e-lock solved access headaches without adding complexity.” Clinical teams often describe this model as moving beyond a storage cabinet into a more complete reprocessing workflow solution. Why teams choose high-volume capacity + Dri-Scope Aid® + e-lock The defining differentiator is combining spacious 16-scope capacity with active internal channel drying and practical electronic access management. Teams often highlight the value of the high-volume platform for: Industry-leading spacing between scopes to reduce crowding and undesirable contact Easier scope retrieval in fast-moving environments Positive pressure HEPA-filtered exterior drying with frequent air exchange, supported by a three-intake/two-exhaust fan design unique to this platform Dri-Scope Aid® is often what moves buyers into this model, with teams citing: Significantly improved drying of internal channels and lumens Constant HEPA-filtered air delivery through all internal endoscope channels Simple connector attachment and compatibility with all major endoscope brands Support for meeting or exceeding evolving AORN, SGNA and ANSI/AAMI ST91:2021 expectations Common feedback sounds like: “It feels like moving from airflow storage into a true drying system.” “We wanted capacity, but not without channel drying assurance.” Teams also value the e-lock for replacing cumbersome physical keys with controlled code access, while maintaining supervisor-level oversight through key override and programmable user access. Workflow fit: where this model tends to stand out This model often resonates with facilities managing: High-volume GI and endoscopy programs Larger scope fleets with frequent turnover Departments prioritizing drying consistency and compliance alignment Teams wanting stronger access control without adding workflow friction Clinical teams also value Harloff advantages like plug-and-play upgradeability, easy maintenance with filter replacement without removing scopes, adjustable airflow settings and the 12-year warranty. Many describe it as “high-volume throughput with drying assurance and smarter control.” Bottom line Clinical teams often see the SC8044DREDP-DSS3316 as a rock-solid high-volume solution that combines spacious handling, comprehensive drying performance and practical electronic access control. For buyers prioritizing throughput, moisture-risk reduction and smarter cabinet security, it is often viewed as a trusted step up into a more complete reprocessing workflow system.

This SureDry scope cabinet with a proximity lock features an external HEPA filtered positive pressure drying system combined with DriScope Aid®, the industry leading system for any internal lumen scope drying cabinet. This combination provides the assurance that facilities will be able to meet all current and anticipated future guidelines for external and internal drying of endoscopes, providing patients with the best possible assurance of infection prevention. The Dri-Scope Aid® cabinet supplies HEPA-filtered air to all internal channels to aid in drying endoscopes with an automated drying cycle for improved turn-around time, and a continuous venting cycle for overnight storage. SC8044DRELPDP-DSS3316: high-volume smart drying cabinet with badge access for teams building tighter control into reprocessing workflow The following reflects how GI teams and procedural buyers often describe this model when they want the spacious 44” high-volume platform, full Dri-Scope Aid® channel drying and a more sophisticated access-control solution centered around badge-based workflow. How clinical teams describe this cabinet in practice This model is often viewed as where drying performance and access control start functioning as one workflow system. You’ll hear feedback framed like: “Using existing staff badges made adoption incredibly easy.” “It gave us the drying assurance we wanted, with access control that fit how our facility already works.” “It feels less like a cabinet and more like managed scope workflow.” Clinical teams often describe this model as a step beyond standard storage security—especially because badge access integrates naturally into hospital habits rather than introducing another system staff has to learn. For many buyers, that’s a major differentiator. Why teams choose high-volume capacity + Dri-Scope Aid® + ELP badge access The defining advantage is combining throughput, drying assurance and smarter credential-based access. Teams often choose the 44” platform for: Industry-leading spacing between scopes for easier handling and reduced contact risk High-volume 16-scope capacity designed around workflow, not density Positive pressure HEPA-filtered exterior drying with robust multi-fan air circulation Easier retrieval in fast-paced GI environments Dri-Scope Aid® is often what elevates this model, with teams highlighting: Significantly improved drying of internal channels and lumens Constant HEPA-filtered air delivery through all internal channels Simple connector attachment and compatibility across major endoscope brands Support for meeting or exceeding AORN, SGNA and ANSI/AAMI ST91:2021 expectations Greater confidence in drying consistency and moisture-risk reduction Common feedback sounds like: “It feels like moving from airflow storage into a true drying system.” “We wanted high volume, but not without full channel drying.” The ELP lock is often what makes this model stand apart. Teams often point to: Use of existing HID-compatible badges (Prox and iClass) for seamless adoption Badge or keypad credential access, including dual-credential options Up to 250 user permissions for controlled departmental access Supervisor assignments and user group management Key override for backup control The ability to add or edit users as staffing changes Many buyers describe badge access as more than convenience—it supports accountability while removing the inefficiencies of keys or shared codes. Workflow fit: where this model tends to stand out This model often resonates with: High-volume GI and endoscopy programs Facilities already using badge credentials and wanting integration continuity Departments focused on drying assurance plus controlled scope access Buyers seeking stronger user-level access management than standard e-lock systems Teams also value plug-and-play upgradeability, easy maintenance without removing scopes, durable steel construction and Harloff’s 12-year warranty. Many describe it as “high-volume drying with smarter credentialed access.” Bottom line Clinical teams often see the SC8044DRELPDP-DSS3316 as a major step beyond traditional drying cabinets—combining spacious high-volume handling, comprehensive channel drying and integrated badge-based access control in a rock-solid platform built for advanced reprocessing workflows.

This SureDry High Volume Scope Drying Cabinet features an external HEPA filtered positive pressure drying system that is unique among endoscope drying cabinet suppliers. The addition of Dri-Scope Aid® upgrades this to a full scope lumen drying cabinet, providing facilities with the assurance that they will be able to meet all current and future endoscope drying cabinet standards for external and internal drying of endoscopes and providing their patients the best possible assurance of infection prevention. This Dri-Scope Aid® Scope Lumen Drying Cabinet supplies HEPA-filtered air to all internal channels to aid in drying endoscopes with an automated drying cycle for improved turn-around time, and a continuous venting cycle for overnight storage. The Dri-Scope Aid® system combined with the Harloff SureDry High Volume Scope Drying Cabinet is a complete drying system for your facility. SC8044DRDP-DSS3316: high-volume 44” channel drying cabinet built for busy departments that need capacity without compromise The following reflects how GI teams and reprocessing leaders often describe this model when they want the spaciousness of the 44” high-volume platform paired with full internal channel drying assurance. How clinical teams describe this cabinet in practice This model is often viewed as the high-volume workhorse platform upgraded for facilities where throughput and drying performance both have to scale. You’ll hear feedback framed like: “We needed the extra scope capacity, but we also wanted full channel drying.” “The spacing supports handling, and Dri-Scope Aid® supports confidence in the process.” “It gave us volume without forcing compromises around drying assurance.” Clinical teams often describe this model as solving two problems at once: managing larger scope inventories while improving consistency around both external and internal drying. For many buyers, that is what moves them from storage-focused cabinets into a more complete drying system. Why teams choose high-volume capacity + Dri-Scope Aid® The defining differentiator is combining spacious high-throughput cabinet design with full channel/lumen drying. Teams often highlight the value of: 16-scope high-volume capacity with exceptional spacing between scopes Reduced crowding that helps minimize undesirable scope-to-scope or scope-to-cabinet contact Positive pressure HEPA-filtered exterior drying Active internal channel drying through Dri-Scope Aid® Faster, more consistent drying support for busy turnover environments Added confidence around retained moisture and moisture-related risk concerns Common feedback sounds like: “It gives us high-volume storage without the packed-in feel of many large cabinets.” “The internal channel drying was the reason we stepped up to this model.” “It feels like moving from a drying cabinet to a complete drying strategy.” Many teams specifically value how the cabinet’s spacious design supports safer handling while Dri-Scope Aid® addresses the internal channels many consider critical to drying performance. Workflow fit: where this model tends to stand out This model often resonates with facilities managing: High-volume GI and endoscopy programs Larger scope fleets with frequent turnover Departments balancing throughput pressures with infection prevention priorities Facilities aligning workflow around evolving drying expectations Growing programs that need scalable drying capacity Teams also point to the broader Harloff platform advantages they value: Positive pressure drying with multiple intake and exhaust fans Adjustable run times and mounting flexibility Easy-maintenance drip trays and filter changes without removing scopes Plug-and-play adaptability and long-term upgrade flexibility Durable medical-grade construction backed by Harloff’s 12-year warranty Many describe it as “high-volume throughput with full drying assurance built in.” Bottom line Clinical teams often see the SC8044DRDP-DSS3316 as the high-volume cabinet for departments that do not want to choose between capacity and drying performance. For buyers prioritizing spacious scope separation, full channel drying and rock-solid workflow reliability, it is often viewed as a trusted solution built for the realities of high-volume endoscopy practice.

Choose the SureDry High Volume endoscope cabinet storage and drying system for your high traffic facility. Perfect for busy units with frequent movement of scopes, SureDry Scope Cabinets feature an external HEPA filtered positive pressure drying system paired with Dri-Scope Aid®, the industry leading internal lumen drying system. The Dri-Scope Aid® Cabinet supplies HEPA-filtered air to all internal channels to aid in drying endoscopes with an automated drying cycle for improved turn-around time, and a continuous venting cycle for overnight storage. SCSS8044DREDP-DSS3316: premium high-volume stainless channel drying cabinet with electronic access for advanced reprocessing workflows The following reflects how GI teams, SPD leaders and buyers often describe this model when they want the most layered version of the 44” high-volume platform—combining spacious scope handling, full internal channel drying, stainless durability and practical electronic access control. How clinical teams describe this cabinet in practice This model is often viewed as the premium “everything-covered” high-volume workhorse. You’ll hear feedback framed like: “It gave us capacity, channel drying, controlled access and stainless durability in one system.” “We weren’t just buying a cabinet—we were investing in workflow protection.” “It feels built for departments that don’t want compromises.” Clinical teams often describe this model as appealing because it addresses four common priorities at once: throughput, drying assurance, long-term durability and smarter access control. Why teams choose high-volume capacity + Dri-Scope Aid® + stainless + e-lock The defining differentiator is layered protection around scopes, workflow and long-term ownership. Teams often choose the 44” platform for its spacious high-volume design, often citing: Industry-leading spacing between scopes for easier retrieval and reduced unwanted contact Better handling ergonomics in busy turnover environments Positive pressure HEPA-filtered drying with a three-intake, two-exhaust fan system unique to this platform Dri-Scope Aid® is often the reason buyers step into this configuration, with teams highlighting: Significantly improved drying of internal channels and lumens Constant HEPA-filtered air delivery through all internal endoscope channels Simple connector attachment with compatibility across major endoscope brands Support for meeting or exceeding AORN, SGNA and ANSI/AAMI ST91:2021 expectations Common feedback sounds like: “It feels like a complete drying strategy, not just cabinet storage.” “The internal channel drying was essential for us.” Teams choosing stainless steel often point to corrosion resistance, non-porous cleanability, long service life and premium material standards, particularly in demanding clinical environments. Many see it as a lifecycle investment. The e-lock adds another layer buyers value, particularly for replacing cumbersome physical keys with programmable multi-user code access, supervisor oversight and key override backup. Some teams note it provides smarter control while still remaining simpler than badge-entry systems with full user-level tracking. Workflow fit: where this model tends to stand out This model often resonates with: High-volume GI and endoscopy centers Facilities prioritizing moisture-risk reduction and compliance readiness Departments standardizing around stainless equipment Buyers wanting practical security upgrades without jumping to advanced access systems Programs investing in long-term durability and process consistency Teams also value plug-and-play upgradeability, easy maintenance without removing scopes, and Harloff’s 12-year warranty. Who this cabinet is really for The SCSS8044DREDP-DSS3316 is typically chosen by teams who: Need spacious 16-scope capacity built for high-throughput workflows Want both external drying and active internal channel drying Prefer stainless steel for durability and cleanability Want electronic access control over traditional keyed cabinets Bottom line Clinical teams often see the SCSS8044DREDP-DSS3316 as a fully featured evolution of the high-volume platform—combining exceptional scope spacing, comprehensive channel drying, stainless durability and practical electronic access control in a rock-solid solution built for demanding endoscopy environments.

This High Volume Endoscope Drying Cabinet with Dri-Scope Aid® features an external HEPA filtered positive pressure drying system that is unique among endoscope drying cabinet suppliers. The addition of Dri-Scope Aid®, the industry leading internal lumen drying system, provides facilities with the assurance that they will be able to meet all current and future guidelines for external and internal drying of endoscopes, providing their patients the best possible assurance of infection prevention. The Dri-Scope Aid® Cabinet supplies HEPA-filtered air to all internal channels to aid in drying endoscopes with an automated drying cycle for improved turn-around time, and a continuous venting cycle for overnight storage. The Dri-Scope Aid® system combined with the SureDry High Volume Endoscope Drying Cabinet provides a complete drying system for your facility. SCSS8044DRDP-DSS3316: high-volume stainless channel drying cabinet built for demanding departments that want capacity, drying assurance and premium durability The following reflects how GI teams and reprocessing leaders often describe this model when they want the spaciousness of the 44” high-volume platform, the added protection of Dri-Scope Aid®, and the long-term advantages of stainless steel construction. How clinical teams describe this cabinet in practice This model is often viewed as the premium high-volume workhorse for departments that refuse to choose between throughput and drying performance. You’ll hear feedback framed like: “It gives us the capacity we need with the drying assurance we want.” “The spacing supports handling, and Dri-Scope Aid® supports confidence.” “We chose stainless because this felt like a long-term solution, not just a cabinet purchase.” Clinical teams often describe this model as combining three priorities that matter in busy GI environments: safer scope handling, advanced drying performance and durable construction built for heavy clinical use. Why teams choose high-volume capacity + Dri-Scope Aid® + stainless steel The defining differentiator is layered protection—around scope handling, internal drying and cabinet longevity. Teams often highlight the 44” platform for: Industry-leading spacing between scopes to reduce crowding and unwanted contact Easier insertion and retrieval in fast-paced environments Reduced concern over dry scopes contacting wet surfaces or adjacent scopes Positive pressure HEPA-filtered airflow with three intake and two exhaust fans for robust cabinet air circulation Dri-Scope Aid® is often what moves teams into this model, with buyers citing: Significantly improved drying of internal channels and lumens Constant HEPA-filtered air delivery through all internal channels Simple connector attachment and compatibility with major endoscope brands Support for meeting or exceeding AORN, SGNA and ANSI/AAMI ST91:2021 expectations Faster, more repeatable drying performance with hands-free operation Common feedback sounds like: “It feels like moving from storage and airflow into a complete drying system.” “The internal channel drying was a major factor for us.” Teams choosing stainless steel often also point to: Corrosion resistance from harsh sanitizers and bio-contaminants Smooth, non-porous surfaces that support cleanability Long service life and lifecycle value Premium material standards often preferred in demanding clinical environments Many describe it as “high-volume drying with premium construction.” Workflow fit: where this model tends to stand out This model often resonates with: High-volume GI and endoscopy programs Facilities with larger scope fleets and heavy turnover Departments prioritizing compliance-focused drying practices Buyers standardizing around stainless equipment platforms Programs investing in long-term durability and process consistency Teams also value Harloff’s plug-and-play upgrade philosophy, easy maintenance, replaceable filters without removing scopes, and 12-year warranty support. Bottom line Clinical teams often see the SCSS8044DRDP-DSS3316 as the premium evolution of high-volume drying—combining exceptional scope spacing, comprehensive channel drying and stainless steel durability in a rock-solid platform built for demanding endoscopy environments.

There’s no better scope cabinet for high-volume scope reprocessing areas than the SC8044DRDP high capacity endoscope cabinet from Harloff. SureDry cabinets are positive pressure scope cabinets, with 3 intake and 2 exhaust fans creating a fully redundant circulation system. This push/pull design creates a vortex of air that flows through the cabinet ensuring maximum drying efficiency. Fan run time is fully adjustable and the HEPA filters remove 99.7% of particulates before entering the cabinet. The incredibly spacious positive pressure scope cabinet allows for easy hanging and retrieval of up to 16 scopes of all scope types. Built with heat-sealed, powder coat steel using tempered glass, double doors and a medical grade electrical system. Multiple locking options and optional dimmable LED lighting is also available.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

This stainless steel scope cabinet features a positive pressure fully redundant HEPA filtered fan system with three intake and two exhaust fans, which meets AAMI and AORN guidelines for positive pressure and also ensures forced drying and equal levels across each and every scope across it’s full length. This high volume stainless steel scope cabinet is the industries most spacious scope cabinet, and can be set up in 16-scope or 8-scope formats for easy hanging and retrieval of all scope types. This scope cabinet is made in the USA of stainless steel, commonly used in the manufacturing of medical devices due to its rust and corrosion resistance, anti-bacterial properties and ease of cleaning and sterilization. Each cabinet features top loading HEPA filters that can be replaced without opening the cabinet, easy to clean surfaces and drip tray, a twelve year manufacturers warranty and optional overhead LED lighting.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

This spacious smart scope cabinet with a sixteen scope capacity uses a push/pull design creating a vortex of HEPA filtered air that flows through the cabinet ensuring maximum drying efficiency. This positive pressure system is powered by three intake fans and two exhaust fans creating a fully redundant circulation system. The addition of Dri-Scope Aid®, the industry leading internal lumen drying system, provides constant delivery of HEPA filtered air through all internal endoscope channels using simple to attach individual disposable scope connectors. The next generation “Tracker” unit is a flexible endoscope tracking system that monitors scope status, check-ins and check-outs made by your staff, scope hang times and provides customizable drying options with unique settings for each scope. Other features that make this a truly “smart” scope cabinet include an intelligent scheduler, automated reminders for filter and tubing replacement, user access restrictions by passcode and optional integrations with Bluetooth or barcode readers (sold separately). The color touchscreen is built into the smart scope cabinet body and provides scope details at a glance with downloadable export files available for endoscope management, user lists and more. This flexible endoscope tracking system helps to meet or exceed AORN, SGNA and AAMI guidelines (including ANSI/AAMI ST91:2021 updated guidelines) when included as part of your endoscope reprocessing workflow.

This SureDry smart scope cabinet with a sixteen scope capacity includes the industry best positive pressure HEPA filtered drying system. Inside air is replaced inside the cabinet up to four times per minute. This flexible endoscope tracking system meets or exceeds AORN, SGNA, and AAMI guidelines. SC8044TD-T3316D: high-volume smart drying cabinet built for teams that want capacity, channel drying and scope workflow intelligence The following reflects how GI teams and reprocessing leaders often describe this model when they want more than a drying cabinet—often positioning it as a high-volume workflow management system built around scope protection, traceability and process control. How clinical teams describe this cabinet in practice This model is often viewed as the flagship “smart” version of the 44” high-volume platform—combining spacious handling, advanced drying and active scope management. You’ll hear feedback framed like: “It doesn’t just dry scopes, it helps us manage them.” “The tracking system changed how we think about workflow and accountability.” “It feels like a procedural tool, not simply a storage cabinet.” Clinical teams often describe this model as a move from passive drying into managed reprocessing workflow, particularly in departments where scope turnover, documentation and consistency all matter. Why teams choose high-volume capacity + Dri-Scope Aid® + Tracker The defining differentiator is combining spacious high-volume drying with real-time workflow visibility. Teams often choose the 44” platform for: Industry-leading spacing between scopes to reduce crowding and unwanted contact Easier hanging and retrieval in busy high-throughput environments Better protection against the handling issues often seen in densely packed cabinets Positive pressure HEPA-filtered drying with powerful, redundant airflow Dri-Scope Aid® often drives the upgrade decision, with teams highlighting: Significantly improved drying of internal channels and lumens Constant HEPA-filtered air delivery through all internal channels Simple connector attachment and compatibility across major endoscope brands Support for meeting or exceeding AORN, SGNA and ANSI/AAMI ST91:2021 expectations Common feedback sounds like: “It feels like moving from storage into a true drying system.” “We wanted the spacious high-volume cabinet, but with full channel drying assurance.” What often sets this model apart, though, is Tracker. Clinical teams often point to the integrated touchscreen system for: Scope check-in/check-out management Drying status visibility at a glance Hang-time monitoring to help manage expiration windows Custom drying parameters by scope type Automated scheduling and maintenance reminders User access controls and exportable data for documentation support Many teams describe it as transforming the cabinet from equipment into active workflow infrastructure. Workflow fit: where this model tends to stand out This model often resonates with: High-volume GI and endoscopy departments Facilities managing larger scope inventories and frequent turnover Teams focused on documentation, traceability and process standardization Programs wanting workflow intelligence alongside drying assurance Buyers preparing for evolving compliance expectations Teams also value Harloff differentiators like plug-and-play flexibility, easy maintenance without removing scopes, durable steel construction and the 12-year warranty. Bottom line Clinical teams often see the SC8044TD-T3316D as the step from high-volume drying cabinet to managed reprocessing system—combining exceptional scope spacing, Dri-Scope Aid® channel drying and Tracker-driven visibility in a rock-solid platform built for demanding endoscopy workflows.

The SureDry Large Size Scope Drying Cabinet includes the industry best Positive Pressure HEPA Filtered Drying system. Inside air is replaced inside the cabinet 4 times per minute. Meets or exceeds AORN, SGNA and ANSI/AAMI ST91:2021 updated guidelines. SC8060DRDP-2DSS2310: large-capacity 60” channel drying system built for enterprise-level GI volume and scalable scope storage planning The following reflects how GI teams and reprocessing leaders often describe this model when standard high-volume cabinets are no longer enough and departments need larger-scale drying capacity with room to grow. How clinical teams describe this cabinet in practice This model is often viewed less as a “bigger cabinet” and more as a scalable drying platform for facilities managing significant scope inventories. You’ll hear feedback framed like: “It gave us the capacity we needed without forcing a custom solution.” “We chose it because it supports today’s volume and tomorrow’s growth.” “It feels designed for building out a full GI storage strategy.” Clinical teams often describe this model as appealing because it solves a common pain point: scaling scope storage without compromising drying performance or workflow consistency. Why teams choose large capacity + Dri-Scope Aid® The defining advantage is combining 20-scope capacity with full internal channel drying in a platform built for expansion. Teams often highlight: Large-capacity storage for high-throughput departments and larger scope fleets Spacious organization designed to support handling efficiency at scale Positive pressure HEPA-filtered drying with powerful redundant airflow, including four intake and two exhaust fans for aggressive cabinet air exchange A configuration that is modular in concept—demonstrating Harloff’s ability to support virtually any GI storage requirement through scalable cabinet combinations Common feedback sounds like: “It gave us large-scale capacity without sacrificing drying confidence.” “We saw it as infrastructure, not just equipment.” “It supports complex scope inventories much better than trying to overfill smaller cabinets.” Many buyers view this model as proof that capacity limitations do not have to dictate workflow compromises. Dri-Scope Aid®: why teams make the upgrade For many facilities, Dri-Scope Aid® is what transforms this from high-capacity storage into a comprehensive drying system. Clinical teams consistently highlight: Significantly improved drying of internal channels and lumens Constant HEPA-filtered air delivery through all internal endoscope channels Simple connector attachment and compatibility with all major endoscope brands Support for meeting or exceeding AORN, SGNA and ANSI/AAMI ST91:2021 expectations Short drying cycles and continuous venting support for demanding turnover environments Teams often describe it as moving from “large storage” to a complete large-scale drying strategy. Workflow fit: where this model tends to stand out This model often resonates with: Large GI and endoscopy programs with heavy procedural volume Facilities managing extensive or growing scope inventories Multi-room departments standardizing enterprise-level reprocessing workflows Buyers planning phased growth and future capacity expansion Teams also value Harloff differentiators like plug-and-play thinking, easy maintenance without removing scopes, replaceable filters that support uptime and the 12-year warranty. Many describe it as “a scalable GI storage platform, not just a 20-scope cabinet.” Bottom line Clinical teams often see the SC8060DRDP-2DSS2310 as a large-scale drying infrastructure solution—combining Dri-Scope Aid® channel drying, major capacity and modular scalability in a platform built for facilities whose scope storage requirements go beyond standard cabinet formats.

Designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines, with antimicrobial handle. Accucold's Pharma-Vac Performance Series are upright all-refrigerators designed and purpose-built for pharmacy, medication, and vaccine applications to support meeting CDC/VFC guidelines.The ARG1PV is a 1 cu.ft. all-refrigerator with an adjustable control range from +2 to +8 ºC. The microprocessor temperature controller is externally located to minimize door openings, helping to protect stored contents from ambient temperature. The buffered temperature probe is encased in a glycol-filled bottle to better simulate temperature of the stored product, with an additional sensor that reads air temperature to ensure superior temperature control. The current and min/max temperature display is viewable in Celsius or Fahrenheit to the nearest tenth of a degree. The audible and visual temperature alarm sounds if the unit's interior goes out of range. Additional alarms include a power failure alert, door open alarm, and sensor failure alarm. This unit is equipped with remote alarm contacts in the rear and a 1/2" probe port on the right side to accept additional monitoring devices. A hospital grade cord with 'green dot' plug is also included for added safety in high traffic areas.Inside, the ARG1PV utilizes adjustable cycle defrost operation to avoid temperature spikes. Optimized forced air cooling with an internal fan to ensure excellent temperature stability and uniformity with rapid recovery after door openings. The adjustable plastic-coated wire shelves can be positioned at 1/2" increments to accommodate virtually any sized item. This unit includes LED internal lighting with an on/off rocker switch. The interior is constructed from white powder coated metal to ensure added durability and better temperature retention. The ARG1PV comes in a white cabinet finish with a blue accented control panel. The factory-installed antimicrobial handle is powder-coated with naturally occurring silver ions, which help to reduce the spread of germs, allowing for a safer, cleaner user experience. The double pane tempered glass door provides a full view of the interior. The user-reversible door ships with a right hand swing and self-closing function (note: self-closing is disabled once reversed to LHD). This model includes a factory-installed lock and ships with two keys for staff use. Powerful magnetic gaskets ensure a positive seal.Designed with hydrocarbon refrigerant, the ARG1PV provides an energy efficient solution to vaccine storage. This unit is Pyxis, Omnicell, and AcuDose RX compatible. Additional sizes, as well as solid door options, are also available. Explore the full Pharma-Vac series at accucold.com/pharmavac.NOTE: Accucold refrigerators are purpose-built to the support meeting the current CDC (Centers for Disease Control) guidelines for the storage of vaccines. At this time, Accucold refrigerators have not been evaluated to the new NSF 456 standard. As referenced in the current Vaccine Storage and Handling Toolkit, these units incorporate microprocessor controls and forced air circulation for stable operation between 2 and 8 ºC. For additional temperature assurance, the CDC recommends a calibrated digital data logger (DDL), which can be added with the factory-installed option DL2B or addition of the DL2BKit accessory.

Hang disinfected scopes and retrieve them for patient use in one convenient location with this SureDry pass through endoscope drying cabinet from Harloff. Designed for use in the wall between your procedure room and reprocessing room, this pass through scope cabinet has a door on each side for secure but easy access for up to ten scopes. The cabinet creates a positive pressure HEPA filtered drying area that meets or exceeds Joint Commission, AORN, SGNA and AAMI recommendations and pass through endoscope cabinet guidelines. Drying of scope channels is further achieved with the built-in Dri-Scope Aid® system, the industry leading internal lumen drying system. This system fulfills forced air recommendations and significantly improves the drying of internal channels. It works with all major endoscope brands using simple to attach individual, disposable scope connectors. Other features of this pass through endoscope drying cabinet include 4 intake and 2 exhaust fans with adjustable run times, multiple locking options, two easy to clean removable drip trays and solid construction backed up by Harloff’s twelve year manufacturer’s warranty.

The SureDry pass through endoscope drying cabinet includes the industry best positive pressure filtered drying system. Inside air is replaced inside the cabinet up to four times per minute. This in-wall scope cabinet meets or exceeds Joint Commission, AORN, SGNA, and AAMI guidelines. SC80WTDRDP-10-DSS2305: pass-through channel drying cabinet built for cleaner room-to-room workflow and advanced drying assurance The following reflects how GI teams and reprocessing leaders often describe this model when they want the workflow advantages of a pass-through cabinet, but also want the added protection of full internal channel drying. How clinical teams describe this cabinet in practice This model is often viewed as where architectural workflow design and advanced drying performance come together. You’ll hear feedback framed like: “It improved scope handoff between rooms while strengthening our drying process.” “It feels like a pass-through workflow solution, not just a cabinet.” “We wanted the clean transfer advantages of pass-through plus true channel drying.” Clinical teams often describe this model as moving beyond scope storage into coordinated reprocessing workflow. For many buyers, that combination is what makes this configuration stand apart. Why teams choose the pass-through configuration The defining advantage starts with the dual-sided workflow design. Teams often highlight: In-wall pass-through configuration supporting direct transfer between reprocessing and procedure rooms Front and rear access doors for cleaner handoff and reduced unnecessary scope movement 10-scope capacity arranged as five scopes per side with dedicated dual drip trays Better separation between reprocessing and point-of-use retrieval More streamlined scope flow built into room design itself Common feedback sounds like: “It supports cleaner movement of scopes through the department.” “We liked that workflow and drying could both be built into the same system.” “It helps reduce friction between reprocessing and procedure teams.” Many buyers view the cabinet as workflow infrastructure as much as storage equipment. Dri-Scope Aid®: why teams make the upgrade For many facilities, Dri-Scope Aid® is what elevates this model. Clinical teams consistently highlight: Significantly improved drying of internal channels and lumens Constant HEPA-filtered air delivery through all internal endoscope channels Simple connector attachment and compatibility across major endoscope brands Short drying cycles and continuous venting support for demanding turnover environments Support for meeting or exceeding AORN, SGNA and ANSI/AAMI drying expectations Common feedback includes: “It feels like moving from airflow storage to a complete drying system.” “Channel drying was what made this the right pass-through cabinet for us.” Many teams see it as adding drying assurance to an already efficient workflow platform. Positive pressure exterior drying: why the SureDry platform matters Beyond channel drying, teams value the cabinet’s core drying performance, including: Positive pressure HEPA-filtered cabinet drying with inside air replaced up to four times per minute Four intake and two exhaust fans for robust airflow support Spacious hanging configuration to support handling confidence Replaceable filters without removing scopes and easy-maintenance removable drip trays Common feedback sounds like: “We wanted both internal and exterior drying working together.” “It gave us confidence in the full drying environment, not just the channels.” Teams also value plug-and-play upgrade flexibility, medical-grade steel construction and Harloff’s 12-year warranty. Many describe it as “pass-through workflow with full drying assurance.” Bottom line Clinical teams often see the SC80WTDRDP-10-DSS2305 as the evolution of the pass-through concept—combining integrated room-to-room workflow, Dri-Scope Aid® channel drying and proven SureDry exterior drying in a rock-solid platform built for advanced endoscopy environments.

Designed to connect to the wall between your reprocessing room and your procedure room, this double sided pass through scope cabinet provides drying capabilities and quick access for up to ten endoscopes. An in-wall scope cabinet system provides a central location for scopes to be dried after sterilization and disinfection, creating a single dirty-to-clean workflow for all endoscopes. This double doored scope cabinet features a positive pressure, fully redundant fan system with four intake fans and two exhaust fans. This push/pull design creates a vortex of HEPA filtered air that flows through the cabinet ensuring maximum drying efficiency. Fans automatically kick on when both doors are closed and have adjustable run times. Other features include drip trays on both sides of the cabinet, a medical-grade electrical system, a replaceable filter system and a walk through platform in the base. Multiple locking options, multiple color options (including stainless steel) and multiple scope configurations are available to match your facility requirements. Pass through scope cabinets, rather than stand alone models, are the preferred style in many facilities and this SureDry scope cabinet meets and exceeds all current JC, AORN, SGNA and AAMI Guidelines.